---

Changing the camera's depth and position

---

Changing the camera's depth

To change the depth of the multiplane camera, drag it with the Select tool.

Its Depth is shown in the XSheet as the distance along the window's ruler. Since the depth of planes is shown in the same way, you can easily see from the XSheet which planes are in front of the camera, and which are behind it.

Changing the camera's position

To change the E/W or N/S position of the camera, first select the correct view (see Changing the view in the window above):

• To move E/W, you must use the Top view.

• To move N/S, you must use the Side view.

Then Ctrl-drag the camera with the Select tool.

Changing the camera's field of view

To change the camera's field of view, simply drag one of the lines showing the field of view.

Titan House, Castle Park, Cambridge CB3 0AY, England Tel: +44 (0) 1223 488200 Fax: +44 (0) 1223 488201 e-mail: support@cambridgeanimation.com

Animo NT User's Guide - Version 2.0 - 29 Jan 1999 Copyright © Cambridge Animation Systems